Fitas

A Ellsworth Adhesives estoca e vende fitas para aplicações industriais em diversos seguimentos. Nosso estoque de fitas inclui fitas de duplo revestimento, fitas de embalagem, fitas selantes, fitas de revestimento simples e especializadas bem como prendedores que podem ser fechados novamente e bumpons para praticamente qualquer trabalho

Itens 1 para 10 de 217 total

por página
Página:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Definir direção ascendente
  1. STM S945 High Temp Silicone Splicing Tape 1 in x 72 yd Roll

    STM S945 High Temp Silicone Splicing Tape 1 in x 72 yd Roll

      

    STM Specialty Tapes Manufacturing S945 High Temp Silicone Splicing Tape is a single coated tape offering a low profile and high strength for releasing coated surfaces. With a 1 mil polyester carrier, and a 1.5 mil silicone adhesive that bonds rapidly and permanently to silicone surfaces. The strong polyester film resists tearing, silicone adhesive is high temperature and chemical resistant, and resists oozing. For greatest adhesion, the surface to be bonded must be clean, dry, and free of oil and dirt. 1 in x 72 yd Roll. Saiba mais
  2. STM S160 High Temperature Paper Tape 23 in x 60 yd Roll

    STM S160 High Temperature Paper Tape 23 in x 60 yd Roll

      

    STM Specialty Tapes Manufacturing S160 High Temperature Paper Tape is a single coated tape that can withstand short term temperature exposure up to 325 °F (163 °C). It has a thick crepe paper backing that offers outstanding puncture protection, release coated and impregnated. This masking tape uses a high temperature rubber adhesive system and can be cleanly removed after cool down. For greatest adhesion, the surface to be bonded must be clean, dry, and free of oil and dirt. 23 in x 60 yd Roll. Saiba mais
  3. STM D969 Differential Silicone-Acrylic Tape 2.75 in x 36 yd Roll

    STM D969 Differential Silicone-Acrylic Tape 2.75 in x 36 yd Roll

      

    STM Specialty Tapes Manufacturing D969 Differential Silicone-Acrylic Tape is double-sided, and includes a permanent bonding acrylic adhesive on one side and a high performance silicone adhesive on the opposite side. The acrylic side of the D969 has a good affinity to other low energy plastic surfaces; while the silicone side adheres well to silicone hard-coats, foams, and silicone rubbers. For greatest adhesion, the surface to be bonded must be clean, dry, and free of oil and dirt. 2 3/4 in x 36 yd Roll. Saiba mais
  4. STM D739 High Speed Flying Splicing Tape 0.5 in x 60 yd Roll

    STM D739 High Speed Flying Splicing Tape 0.5 in x 60 yd Roll

      

    STM Specialty Tapes Manufacturing D739 High Speed Flying Splicing Tape is double-sided, blue color for identification, and has a 1 mil PET film backing. This ultra high tack acrylic adhesive tape was designed as a high speed flying splice tape, it offers outstanding wet-out properties to substances such as polypropylene, polyethylene, loosely woven fabrics, as well as low energy films. For greatest adhesion, the surface to be bonded must be clean, dry, and free of oil and dirt. 1/2 in x 60 yd Roll. Saiba mais
  5. STM D670 Double Coated Tuff Tape III 0.9375 in x 36 yd Roll

    STM D670 Double Coated Tuff Tape III 0.9375 in x 36 yd Roll

      

    STM Specialty Tapes Manufacturing D670 Double Coated Tuff Tape III is an aggressive adhesive tape that is highly resistant to moisture and water. Withstands extreme temperature variations including humidity, heat, and cold. Tape carrier is 1.2 mils polypropylene, and adhesive is 3.5 mils on each side acrylic. It is resistant to plasticizers and offers superior adhesion to irregular surfaces. For greatest adhesion, the surface to be bonded must be clean, dry, and free of oil and dirt. 15/16 in x 36 yd Roll. Saiba mais
  6. Bergquist Bond-Ply 800 Thermally Conductive Acrylic Adhesive Tape Gray 12 in x 12 in x 0.008 in

    Bergquist Bond-Ply 800 Thermally Conductive Acrylic Adhesive Tape Gray 12 in x 12 in x 0.008 in

      

    Bergquist Bond-Ply 800 is a double-sided, acrylic adhesive tape on a fiberglass reinforced carrier. It is used for mounting heat sinks, heat spreaders, and LED assemblies that require thermal and electric isolation. It is thermally conductive and bonds well to epoxies and metals. 12 in x 12 in, 0.008 in thick. Saiba mais
  7. Bergquist Bond-Ply 800 Thermally Conductive Acrylic Adhesive Tape Gray 12 in x 12 in x 0.005 in

    Bergquist Bond-Ply 800 Thermally Conductive Acrylic Adhesive Tape Gray 12 in x 12 in x 0.005 in

      

    Bergquist Bond-Ply 800 is a double-sided, acrylic adhesive tape on a fiberglass reinforced carrier. It is used for mounting heat sinks, heat spreaders, and LED assemblies that require thermal and electric isolation. It is thermally conductive and bonds well to epoxies and metals. 12 in x 12 in, 0.005 in thick. Saiba mais
  8. Bergquist Bond-Ply 100 Thermally Conductive Acrylic Adhesive Tape White 11 in x 12 in x 0.011 in

    Bergquist Bond-Ply 100 Thermally Conductive Acrylic Adhesive Tape White 11 in x 12 in x 0.011 in

      

    Bergquist Bond-Ply 100 is a double-sided, acrylic adhesive tape on a fiberglass reinforced carrier. It is used for mounting heat sinks or heat spreaders instead of using screws, clips, or adhesives. It has a high bond strength and is thermally conductive. 11 in x 12 in, 0.011 in thick. Saiba mais
  9. Bergquist Bond-Ply 100 Thermally Conductive Acrylic Adhesive Tape White 11 in x 12 in x 0.005 in

    Bergquist Bond-Ply 100 Thermally Conductive Acrylic Adhesive Tape White 11 in x 12 in x 0.005 in

      

    Bergquist Bond-Ply 100 is a double-sided, acrylic adhesive tape on a fiberglass reinforced carrier. It is used for mounting heat sinks or heat spreaders instead of using screws, clips, or adhesives. It has a high bond strength and is thermally conductive. 11 in x 12 in, 0.005 in thick. Saiba mais
  10. Bergquist Bond-Ply 100 Thermally Conductive Acrylic Adhesive Tape White 11 in x 12 in 0.008 in

    Bergquist Bond-Ply 100 Thermally Conductive Acrylic Adhesive Tape White 11 in x 12 in 0.008 in

      

    Bergquist Bond-Ply 100 is a double-sided, acrylic adhesive tape on a fiberglass reinforced carrier. It is used for mounting heat sinks or heat spreaders instead of using screws, clips, or adhesives. It has a high bond strength and is thermally conductive. 11 in x 12 in, 0.008 in thick. Saiba mais

Itens 1 para 10 de 217 total

por página
Página:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Definir direção ascendente